Select Automatic Discovery to automatically detect and on the local sub-network.
Important:
Before using this option, verify that the appropriate network configuration tasks have been performed. Refer to the storage management software installation guide for your operating system for details.
The Automatic Discovery process sends out a broadcast message across the local sub-network, and any storage array responding to the message is included in the Tree view.
In rare cases, a storage array might respond to the broadcast message during the automatic discovery process, but its response is dropped over the network before it reaches the Enterprise Management software. If this occurs, the storage array is not displayed in the Tree view, and you must select Edit >> Add Storage Array to manually add the storage array.
If you need to stop the Automatic Discovery operation for any reason, close the .
Select Edit >>Add Storage Array to add storage arrays that are outside of the local sub-network.
This option is not available if a Rescan, Add, Remove, or another Automatic Discovery operation is currently in progress.
To discover storage arrays, perform the following steps:
1
Select Tools >> Automatic Discovery.
2
Click OK.
Any discovered storage arrays are displayed in the Tree view and in the Table view.