Reset Storage Array iSCSI Baseline

This command resets the iSCSI baseline for the storage array to 0.

Syntax

reset storageArray iscsiStatsBaseline

Parameters

None.

Notes

This command resets the baseline to 0 for both RAID controller modules in the storage array. The purpose of resetting both of the RAID controller module baselines is to help ensure that the RAID controller module counts are synchronized between the RAID controller modules. If one RAID controller module resets but the second RAID controller module does not reset, the host is informed that the RAID controller modules are out of synchronization. The host is informed by the time stamps that are reported with the statistics.