Delete Host Port
This command deletes a host bus adapter (HBA) host port identification. The identification is a software value that represents the physical HBA host port to the RAID controller module. By deleting the identification, the RAID controller module no longer recognizes instructions and data from the HBA host port.
Syntax
delete hostPort [hostPortName]
Parameters
Parameter Description hostPortName
Name of the HBA host port you want to delete. Enclose the HBA host port name in square brackets ([ ]). Notes
An HBA host port is a physical connection on a host bus adapter that resides within a host computer. An HBA host port provides a host access to the virtual disks in a storage array. If the host bus adapter has only one physical connection (one HBA host port), the terms HBA host port and host bus adapter are synonymous.
Minimum Firmware Level
5.20