Remote Access Controller Information

note.gif NOTE: Some features documented in this online help may not be available on your system's remote access controller (RAC).

Use this window to view general information about the RAC installed in your system. All controls on this window are static; that is, they display the current RAC settings, but you cannot change the settings from this window.

System Tree Selection  Tab Subtab  User Privileges
     View Manage
Main System Chassis
Remote Access Controller Properties Information U, P, A A

U=User; P=Power User; A=Administrator; NA=Not Applicable. For more details on user privilege levels, see "Privilege Levels in the Server Administrator GUI."

[Back to Top]

Remote Access Controller Information Controls

Refresh Displays updated configuration settings for the RAC. This control is useful to check if the configuration settings have changed since you began viewing them.
Product Displays the product name of the RAC.
Description Describes the functionality offered by the RAC.
Version Specifies the RAC firmware version.
NIC Enabled? Specifies whether or not the RAC network interface controller (NIC) is enabled in firmware. Valid values are Yes or No.
DHCP Enabled? Specifies whether or not the RAC is configured to obtain its IP address from a DHCP server. Valid values are Yes or No.
Current IP Address Specifies the IP address the RAC is currently using.
Current Subnet Specifies the current subnet mask for the RAC.
Current Gateway Specifies the current IP address of the gateway servicing the RAC NIC.
PCMCIA Card Information (if present) Specifies information about the optional PCMCIA modem, if installed.
SMTP Enabled? Specifies whether or not Simple Mail Transfer Protocol (SMTP) is enabled in the RAC firmware. Valid values are Yes or No.
SMTP Server IP Address Specifies the currently configured IP address for the SMTP (e-mail) server used by the RAC for sending e-mail notifications.
Remote Floppy Boot Enabled? Specifies whether or not the remote floppy boot feature is enabled in the RAC firmware. Valid values are Yes or No.
Remote Floppy TFTP Server IP Address Specifies the IP address of the Trivial File Transfer Protocol (TFTP) server on which a remote floppy boot image resides.
Remote Floppy TFTP Server Path Specifies the file path on the TFTP server to the remote floppy boot image.
Firmware Update IP Address Specifies the IP address of the server on which a firmware update file resides.
Firmware Update Path Specifies the file path on the firmware update server to the firmware update file.

[Back to Top]