Show Disk Group

This command returns the following information about a disk group:

• Status (online or offline)
• Physical Disk type (Fibre Channel, SATA, SAS, or PATA)
• Enclosure loss protection (yes or no)
• Current owner (RAID controller module slot A or slot B)
• Associated virtual disks and free capacity
• Associated physical disks (physical disks)

  Note: You can use the free capacity area value when creating a virtual disk based on the free capacity of a disk group. For a description of how to use the free capacity value, refer to the create virtual disk command on Create RAID Virtual Disk (Free Capacity Base Select).

Syntax

show diskGroup [volumeGroupNumber]

Parameters

Parameter	Description
volumeGroupNumber	The number of the disk group for which you want to display information. Enclose the disk group number in square brackets ([ ]).

Notes

This command returns disk group information as shown in the following example:

Minimum Firmware Level

6.10
7.10 adds SAS