Set Physical Disk Hot Spare

Set Physical Disk Hot Spare

This command assigns or unassigns one or more physical disks as a hot spare.

Syntax

set (physical disk [trayID,slotID] | physical disks [trayID1,slotID1 ... trayIDn,slotIDn]) hotSpare=(TRUE | FALSE)

Parameters

Parameter Description

trayID,slotID
Identifies the enclosure and slot where the physical disk resides. Enclosure ID values are 0 to 99. Slot ID values are 1 to 32. Enclose the enclosure ID and slot ID values in square brackets ([ ]).

hotSpare
Assigns the physical disk as the hot spare. To assign the physical disk as the hot spare, set this parameter to TRUE. To remove a hot spare assignment from a physical disk, set this parameter to FALSE.

Minimum Firmware Level

6.10

Parameter	Description
`trayID,slotID`	Identifies the enclosure and slot where the physical disk resides. Enclosure ID values are 0 to 99. Slot ID values are 1 to 32. Enclose the enclosure ID and slot ID values in square brackets ([ ]).
`hotSpare`	Assigns the physical disk as the hot spare. To assign the physical disk as the hot spare, set this parameter to TRUE. To remove a hot spare assignment from a physical disk, set this parameter to FALSE.