Use the Revive option to revive (attempt to spin up) the physical disks in a selected . The Recovery Guru advises using this option when a failed SCSI or a failed causes a multi-physical disk failure. In either case, it is possible that the data on the physical disks is not corrupt, and the can be successfully revived. Perform the following steps:
Important:??Correct use of this option depends on the data configuration on all physical disks in the disk group. Never attempt to revive a disk group unless supervised by a Customer and Technical Support representative.
Important: This operation fails if one or more of the physical disks is unusable and cannot be revived.
1
Select the disk group in the Logical View, and select Advanced >> Recovery >> Revive >> Disk Group.
2
Click Yes.
The following events occur:
The virtual disks in the disk group return to an state in the Logical View.
Physical Disks in the Physical View that are associated with the disk group will return to an Optimal state.
in the Logical View.
