Start Physical Disk Channel Blink

This command identifies the physical disk enclosures connected to a specific physical disk channel by turning on the indicator lights for the physical disk enclosure connected. (Use the stop physicalDiskChannel locate command to turn off the physical disk enclosure indicator lights.)

Syntax

start physicalDiskChannel [(1 | 2 | 3 | 4)]locate

Parameters

Parameter	Description
physicalDiskChannel	The identifier number of the physical disk channel that you want to locate. Valid physical disk channel values are 1, 2, 3, or 4. Enclose the physical disk channel identifier number in square brackets ([ ]).

Minimum Firmware Level

6.10